operating manual B100F / B140F 2019-06-27
11
3.4. Tuning options / electronics
We do not want to elaborate on the electronic control because
it is explained in detail in the Pro Jet manual. You should study
the latter carefully.
Avoid
a system reset!!!
As a result, the ECU may have to be updated at the
AeroDesignWorks factory.
The ECU features a CODE controlled menu system. Every
number features an individual menu point. From these menu
points you have options of changing different pre-set
parameters. This should, if at all, be done very carefully
because the factory setting of the parameters is optimal
already.
The following parameters are to be controlled, i.e. changed,
also after a system reset (see attached sheet).
3.1 Battery voltage
2.3 Adjustment of the temperature sensor
2.2 Glow voltage
2.1 Pulse width of the sender signal
1.4 Pump starting voltage
