AeroClave
RDS 3110 Operator Manual
Released July 1, 2020
Page 19
Use or disclosure of data contained on this sheet is subject to the restriction on the cover page of this User’s Manual.
4.5.7
To decrease the amount of time, press DOWN. (Figure 18)
4.5.8
Once time injected has been input, the cycle is ready to begin. (Figure 19)
4.5.9
Using the included handheld remote (Figure 20), press the button to start the
decontamination cycle, OR press the Start button on the Computer Controller (Figure 21)
NOTE:
If the unit needs to be turned off prior to the end of the cycle, press either button
again to terminate the cycle.
FIGURE 18
FIGURE 19
