96
Manual reset:
Manual reset temperature is 90
o
C. When the safety temperature limiters reach the 90
o
C, safety temperature
limiter is triggered, and preheater will be disconnected from the power supply.
If the manual reset is active, there is most likely a problem with the heater. Manual reset is only
to be pushed if problem is identified and solved.
Automatically reset:
Automatically reset temperature is 70
o
C. When the safety temperature limiters reach the 70
o
C, safety
temperature limiter is triggered, and preheater will be disconnected from the power supply.
When the temperature falls below
70
o
C
, the electrical heater will automatically switch on.
7.4 Outdoor air pre filter ePm10 50%
7.4.1 Functional description of outdoor air pre filter
The ePm10 50% is pre-filter. It is used to prevent the contamination on the fine filter.
7.4.2 Installation of outdoor air pre filter
RISK OF INJURY! Make sure that the power connection is disconnected, and fan is not moving
before doing any work on the device.
Danger of electric shock; moving parts (fan) and hot surface.
After install the accessory, refer to chapter 4.1 for the commissioning.
1.
Remove the filter lock. (Fig. 79)
2.
Place the filter lock as shown below
(Fig. 80)
Fig. 79
Fig. 80
Содержание EVO-R
