AERMEC Omnia ULI 16 PC, Инструкция по использованию и установке

Страница: 14 / 44

14
IULIPCLJ 1810 - 6976445_02
USE (OMNIA ULI_PC)
COMMANDS:
Ventilation is only allowed when the fins are open; if necessary, open them manu-
ally. Closing the fins switches off ventilation although the electronic thermostat remains
active and continually records ambient data to ensure a prompt restart if the fins are
opened again. The "Cold plasma" purifier is automatically activated when the ventila-
tion starts up.
STARTING
OFF The fan coil is switched off.
It may however start again in Heat mode (anti-freeze function) if the room temperature
falls below 7°C and the water temperature is suitable; in this case the red LED flashes.
To start the fan coil, turn the knob towards the functioning mode required in the AUTO
position or in one of the three ventilation speeds.
SELECTING THE SPEED
AUTO The thermostat maintains the set temperature by changing the fan speed in
Automatic Mode in accordance with the room temperature and the set temperature.
V1 In this position, the minimum ventilation speed stays active regardless of ther-
mostat requests.
V2 In this position, the minimum ventilation speed stays active regardless of ther-
mostat requests
V3 In this position, the minimum ventilation speed stays active regardless of ther-
mostat requests
AUX = In this position, ventilation is linked with the type of accessory connected to the
thermostat.
VENTILATION LOGIC IN AUX POSITION
SYSTEM VENTILATION DESCRIPTION
2-pipe system Auto
Ventilation functions with the
thresholds of Auto mode (except in
pre-ventilation / post-ventilation)
2-Pipe System with Cold Plasma V1
Ventilation active at minimum speed
for environment purification.
2-Pipe System with Bactericide lamp V1
Ventilation active at minimum speed
for environment purification.
The LED (C) changes colour to indicate the functioning mode
that is active:
RED On
indicates Heat operation
(heating).
Flashing
indicates anti-freeze mode.
BLUE On
indicates Cool operation
(cooling).
FUCHSIA Flashing:
Indicates that there is a permanent inverter
alarm.
The LED (D) indicates a request from the electronic thermostat
for ventilation:
YELLOW On:
Indicates that the thermostat has detected a
room temperature that requires ventilation to be
started; if this does not occur, it means that the
water circulating in the system has not yet reached a
suitable temperature for enabling ventilation, when
the ventilation is activated, the Cold plasma is also
activated at the same time.
Off
Indicates that the fins are closed and the fan can-
not start.
If the fin is open, led (D) Off Indicates that the ther-
mostat is in stand-by (selector switch A is in position
OFF) or that the thermostat does not require the fan
to operate.
Flashing
indicates a functioning fault of the ambient
probe (Emergency Mode).
LIGHT VISUALISATIONS (ULI_PC in the standard configuration)