14
ACCESSORIES
Compatibility of Accessories
AER485P1:
RS-485 interface for supervision systems with MODBUS protocol.
AERBACP:
Ethernet communication Interface for protocols Bacnet/IP, Modbus
TCP/IP, SNMP
DCPX:
Device for condensation temperature control, with continuous speed mo-
dulation of fans by using a pressure transducer.
GPNY_BACK:
kit with 1 anti-intrusion grid for the short side of the unit.
GPNYB_SIDE:
kit with 2 anti-intrusion grids for the long side of the unit.
MULTICHILLER_EVO:
Control, switch-on and switch-off system of the single
chillers where multiple units are installed in parallel, always ensuring constant
flow rate to the evaporators.
PGD1:
Allows you to control the unit at a distance.
FACTORY FITTED ACCESSORIES
DRE:
Electronic device for peak current reduction.
KNYB:
Pair of caps with grooved joints assembled on the unit manifold.
KREC:
Accessory kit to remote the electric power supply input to the back
RIF:
Power factor correction. Connected in parallel to the motor allowing about
10% reduction of input current.
COMPATIBILITY WITH VMF SYSTEM
For more information about VMF system, refer to the dedicated documen-
tation.
Accessories
Model
Ver
0550
AER485P1
A,E
•
AERBACP
A,E
•
DCPX
A
•
GPNYB_SIDE
A,E
•
GPNY_BACK
A,E
•
MULTICHILLER_EVO
A,E
•
PGD1
A,E
•
DRE: electronic device for peak current reduction
Ver
0550
A,E
DRE (1)
(1) Contact the factory
A grey background indicates the accessory must be assembled in the factory
KNYB: Pair of caps with grooved joints assembled on the unit manifold
Ver
0550
A,E
KNYB
A grey background indicates the accessory must be assembled in the factory
KREC: kit to remote the electric power supply input to the back
Ver
0550
A,E
KREC
A grey background indicates the accessory must be assembled in the factory
RIF: Power factor correction
Ver
0550
A,E
RIF (1)
(1) Contact the factory
A grey background indicates the accessory must be assembled in the factory
Содержание NRV 0550
Страница 2: ......
