AERMEC ANZ 020, Техническое руководство

Страница: 5 / 64

5
xxx
xxxx
General standards
• This manual and the
wiring diagrams supplied
with the unit must be kept
in a dry place for possible
future consultation and for
the entire life of the machine.
This manual has been drawn up
with the aim of supporting the
correct installation of the unit and
providing all the indications for the
correct use and maintenance of the
device. B
efore proceeding with
the installation, please read all the
information in the manual carefully
as well as the procedures necessary
for the correct installation and use of
the unit
.
• Be careful to adhere to the
instructions in this manual and
observe the safety regulations
currently in place.
• The device must be installed in
compliance with the local legislation
currently in force in the country of
destination.
• Non-authorised tampering with
the equipment, whether electrical
or mechanical, will make
THE
WARRANTY VOID and exclude any
liability on the part of the company
.
• Check the electrical characteristics
shown on the registration plate
(fi g.01) before making the electrical
connections. Read the instructions in
the specifi c section about electrical
connections.
• If the unit needs to be repaired, in all
cases contact a specialised AERMEC
after sales centre and only use OEM
spare parts.
• The manufacturer furthermore
declines any liability for any injury to
persons or damage to things resulting
from the failure to comply with the
information in this manual.
• Permitted uses: this series of chillers
is suitable for producing warm/cold
water to use in hydronic systems
the purpose of which is heating/air
conditioning.
Any use other than that permitted
or outside the operating limits
mentioned in this manual is forbidden
if not previously agreed with the
company. The warranty does not
include payment for damage due to
wrong installation of the unit by the
installer.
• The warranty does not include
payment for damage due to the
improper use of the unit by the user.
• The manufacturer does not consider
itself liable for accidents to the user
or the installer due to the incorrect
installation or improper use of the
unit.
•The device must be installed in such
a way that maintenance and/or
repair operations can be carried out.
The warranty of the device does not
in any case cover costs incurred
as a result of motorised ladders,
scaffolding or any other lifting
systems made necessary to carry out
the operations under warranty.
The warranty is not valid when:
• the services and the repairs have
been carried out by non-authorised
personnel or companies;
• the unit has been repaired or
modifi ed in the past with non OEM
spare parts;
• the unit has not been adequately
maintained;
• if the instructions described in this
manual have not been followed;
• if non-authorised modifi cations have
been made.
N.B.:
The Manufacturer reserves the right at
all times to make any modifi cation for
the improvement of its product and is
not obliged to add these modifi cation
to machines of previous manufacture
that have already been delivered or are
being built.
The warranty conditions are any
subject to the general sales conditions
at the moment the contract is fi nalised.
fig.01