TF7038GB_A_NOT
2.
UNIT DESCRIPTION
The Connect WP is a water-cooled heat pump that uses R410A refrigerant. This interior unit has a
hermetic cooling circuit with an inverter rotary piston compressor, as well as a unit- and source-side plate
heat exchanger. It is a single-circuit unit. A water filter, differential pressure controller and safety valve are
all installed on the sink- and source-side as standard. Microprocessor-controlled regulation including LCD
display allows the unit to be operated easily via the user menu.
PLINTH AND LOAD-BEARING CONSTRUCTION
Consisting of elements made from hot-dipped galvanised sheet steel of the appropriate strength. All
components feature a weather-resistant polyester powder coating (RAL 9002). During the design phase, it
was ensured that all interior components are easily accessible. All housing plates are coated with sound-
absorbing material of the appropriate thickness. The power and water connections are all located at the
top of the unit. This makes them easily accessible for installation and maintenance work, and very little
technical space is required given their space-saving layout.
UNIT DIMENSIONS
2.2.1.
HOUSING DIMENSIONS
Connect WP 120
Connect WP 130
WP
Dimensions without pallet (mm)
Dimensions with Euro pallet (mm)
Sizes
A
B
C
A1
B1
C1
120
976
605
603
1120
800
1200
130
1126
605
773
1120
800
1200
7