TF7038GB_A_NOT
6
TYPE PLATE
The heat pump is labelled with a technical type plate.
Caution
If the type plate or other elements that safely identify the product are changed,
removed or go missing, installation and maintenance work will be more difficult.
INTRODUCTION
The Connect WP is a water-cooled heat pump that uses R410A refrigerant. This interior unit has a
hermetic cooling circuit with an inverter rotary piston compressor, as well as a unit- and source-side
plate heat exchanger. It is therefore perfectly designed to use waste heat from exhaust fans and offers
the following benefits in particular:
Highly efficient
These units have been optimised for waste heat utilisation, whereby high levels of efficiency can
be achieved.
Connections
All power and water connections are in the upper section of the unit, which makes installation and
maintenance easier. By reducing the required space, the unit can also be positioned in minimal free
space.
Quiet
The Connect WP units stand out given their quiet operation. The careful sound insulation of the
unit using sound-absorbing material means the Connect WP series can be used in plant rooms.
Area of application
The exhaust air heat can be fed back to the building by the heat pump via a domestic hot water
preheating stage and a return flow boost on the heating side. Combining these two heat sinks
guarantees that as much heat is removed as possible and offers the opportunity to provide heat all
year round. The Connect WP output is adjusted automatically to the heat quantity of the exhaust
air.
