aerauliqa QR230E, Руководство по установке

Страница: 10 / 39

10
Karbantartás/csere után törölhetjük a szűrő figyelmeztetést (nullázhatjuk a számlálót).
Csak akkor választható ki, ha a SZŰRŐ ikon megjelenik (7.b - ábra
11
User menu
1 Mode Selection
2 Boost
3 Boost Duration
4 Reset FILTER Alarm
5 Night Mode
6 Installer menu
It allows to select the Boost speed.
Press OK to select.
Choice NO or YES using
 or  .
Press OK to select.
User menu
1 Mode Selection
2 Boost
3 Boost Duration
4 Reset FILTER Alarm
5 Night Mode
6 Installer menu
Boost speed can be selected only if the Mode selection is 3V or HOLIDAY.
Boost function can be activated in these ways:
- In the user menu, with the Boost function
- via the BOOST button on the CTRL-DSP (Fig.7.b - )
- Using a momentary switch connected to the BST ON/OFF (only if no dehumidifier is installed) - Fig.5.f.
When Boost is active, the icon
is displayed on the LCD and the unit runs at 100% speed for the
duration set in the “Boost duration” menu; afterwards the unit reverts to selected speed.
Boost can be deactivated by holding BOOST button on the CTRL-DSP for 2 seconds.
It allows to set the duration of the boost speed.
Press OK to select.
The factory setting (DEFAULT) is 15’.
Time options are 15’ - 30’ - 45’ - 60’.
Time is flashing: use
 increase the time and  to decrease.
Press OK to select.
User menu
1 Mode Selection
2 Boost
3 Boost Duration
4 Reset FILTER Alarm
5 Night Mode
6 Installer menu
It allows to reset the filter alarm after maintenance/replacement.
It can be selected only if the FILTER icon is displayed (Fig.7.b - ).
Press OK to select.
User menu
1 Mode Selection
2 Boost
3 Boost Duration
4 Reset FILTER Alarm
5 Night Mode
6 Installer menu
It allows to deactivate the automatic operation of the speed increased via sensors during nocturnal hours.
It operates from 8:00 p.m. to 8:00 a.m (fixed period of time). The sensors have no effect and the unit runs
at the selected continuous speed.
OFF is flashing: use
 or  to chance to ON.
Press OK to select.
The factory setting (DEFAULT) is OFF.
User menu
1 Mode Selection
2 Boost
3 Boost Duration
4 Reset FILTER Alarm
5 Night Mode
6 Installer menu
It allows to select the Installer menu.
Press OK to enter the Installer menu.
Press ESC to go back to the previous menu.
Enter
installer menu?
K
I
.
A kiválasztáshoz nyomja meg az OK gombot.
Segítségével az éjszakai órákban kikapcsolhatja az érzékelőkön keresztül bekapcsolt nagyobb se-
bességre váltás automatikus működését. Este 8:00 és reggel 8:00 között működik (meghatározott
időben). Az érzékelők hatástalanok lesznek és a berendezés a kiválasztott állandó sebességfoko-
zaton működik tovább.
A KI felirat villog: bekapcsoláshoz ▲ vagy ▼ gombbal válassza az „ON” (BE) opciót.
A kiválasztáshoz nyomja meg az OK gombot.
A gyári beállítás (ALAPÉRTELMEZETT) az OFF (KI).
Kiválaszthatja a Telepítő menüt.
11
User menu
1 Mode Selection
2 Boost
3 Boost Duration
4 Reset FILTER Alarm
5 Night Mode
6 Installer menu
It allows to select the Boost speed.
Press OK to select.
Choice NO or YES using
 or  .
Press OK to select.
User menu
1 Mode Selection
2 Boost
3 Boost Duration
4 Reset FILTER Alarm
5 Night Mode
6 Installer menu
Boost speed can be selected only if the Mode selection is 3V or HOLIDAY.
Boost function can be activated in these ways:
- In the user menu, with the Boost function
- via the BOOST button on the CTRL-DSP (Fig.7.b - )
- Using a momentary switch connected to the BST ON/OFF (only if no dehumidifier is installed) - Fig.5.f.
When Boost is active, the icon
is displayed on the LCD and the unit runs at 100% speed for the
duration set in the “Boost duration” menu; afterwards the unit reverts to selected speed.
Boost can be deactivated by holding BOOST button on the CTRL-DSP for 2 seconds.
It allows to set the duration of the boost speed.
Press OK to select.
The factory setting (DEFAULT) is 15’.
Time options are 15’ - 30’ - 45’ - 60’.
Time is flashing: use
 increase the time and  to decrease.
Press OK to select.
User menu
1 Mode Selection
2 Boost
3 Boost Duration
4 Reset FILTER Alarm
5 Night Mode
6 Installer menu
It allows to reset the filter alarm after maintenance/replacement.
It can be selected only if the FILTER icon is displayed (Fig.7.b - ).
Press OK to select.
User menu
1 Mode Selection
2 Boost
3 Boost Duration
4 Reset FILTER Alarm
5 Night Mode
6 Installer menu
It allows to deactivate the automatic operation of the speed increased via sensors during nocturnal hours.
It operates from 8:00 p.m. to 8:00 a.m (fixed period of time). The sensors have no effect and the unit runs
at the selected continuous speed.
OFF is flashing: use
 or  to chance to ON.
Press OK to select.
The factory setting (DEFAULT) is OFF.
User menu
1 Mode Selection
2 Boost
3 Boost Duration
4 Reset FILTER Alarm
5 Night Mode
6 Installer menu
It allows to select the Installer menu.
Press OK to enter the Installer menu.
Press ESC to go back to the previous menu.
Enter
installer menu?
K
I
„Belép a telepítő menübe?”
A telepítő menübe történő lépéshez nyomja meg az OK gombot.
Az előző menübe való visszalépéshez nyomja meg az ESC gombot.
7.2 Telepítő menü
A telepítő menüt kiválaszthatja a Felhasználó menü 6. pontja segítségével vagy ha hozzávetőleg 7 másodpercen keresztül nyomva tartja
az OK+ESC gombokat. A telepítő menü elhagyásához nyomja meg az ESC gombot vagy várjon körülbelül 60 másodpercet.
A ▲ vagy ▼ gombokkal választhatja ki a menüt.
MEGJEGYZÉS:
A 4-es menü („Bypass settings” - megkerülő beállítások) csak akkor jelenik meg, ha a 3-as menü
(„Bypass” - megkerülő) vagy az 5-ös menü („Free cooling” - szabad hűtés) „YES” (igen) beál-
lításon van.
A 7-es menü („Heating Threshold” - fűtési küszöb) csak akkor jelenik meg, ha a 6-os menü
(„Heating” - Fűtés) a PRE (elő) vagy POST (utó) opcióra van állítva.
Az angol, olasz, holland, francia, német és spanyol nyelvek közül választhat.
A belépéshez nyomja meg az OK gombot.
A Language (nyelv) villog: a választáshoz használja a ▲ vagy ▼ gombokat.
A kiválasztáshoz nyomja meg az OK gombot.
A gyári beállítás (ALAPÉRTELMEZETT) az angol („English”).
10
User menu
1 Mode Selection
2 Boost
3 Boost Duration
4 Reset FILTER Alarm
5 Night Mode
6 Installer menu
It allows to reset the filter alarm after maintenance/replacement.
It can be selected only if the FILTER icon is displayed (Fig.7.b - ).
Press OK to select.
User menu
1 Mode Selection
2 Boost
3 Boost Duration
4 Reset FILTER Alarm
5 Night Mode
6 Installer menu
It allows to deactivate the automatic operation of the speed increased via sensors during nocturnal hours.
It operates from 8:00 p.m. to 8:00 a.m (fixed period of time). The sensors have no effect and the unit runs
at the selected continuous speed.
OFF is flashing: use  or  to chance to ON.
Press OK to select.
The factory setting (DEFAULT) is OFF.
User menu
1 Mode Selection
2 Boost
3 Boost Duration
4 Reset FILTER Alarm
5 Night Mode
6 Installer menu
It allows to select the Installer menu.
Press OK to enter the Installer menu.
Press ESC to go back to the previous menu.
Enter
installer menu?
I
7.2 Installer Menu
The Installer menu can be selected either by selecting point 6) in the User menu or by holding Ok+ESC for about 7 seconds.
To exit the installer menu press ESC or wait for about 60 seconds.
It allows to select the language among English, Italiano, Nederlands, Français, Deutsch, Espanol.
Press OK to enter.
Language is flashing: use  or  to choose.
Press OK to select.
The factory setting (DEFAULT) is English.
Installer menu
1 Language
2 Date/Time
3 Bypass
4 Bypass settings
5 Free Cooling
6 Heating
7 Heating Threshold
8 Dehumidification
9 Speed Setting
10 Airflow Balancing
11 F7 filter
12 Filter Alarm interval
13 Working Hours Counter
14 Save settings
15 Load settings
16 Restore Default Settings
17 Contrast
18 Debug page
Use  or  to select the menu.
NOTE:
Menu 4 “Bypass settings” displays only if either Menu 3 “Bypass” or Menu 5 “Free Cooling is set on “YES”.
Menu 7 “Heating Threshold” displays only if Menu 6 “Heating” is set on PRE or POST.
Installer menu
1 Language
2 Date/Time
3 Bypass
4 Bypass settings
5 Free Cooling
10
User menu
1 Mode Selection
2 Boost
3 Boost Duration
4 Reset FILTER Alarm
5 Night Mode
6 Installer menu
It allows to reset the filter alarm after maintenance/replacement.
It can be selected only if the FILTER icon is displayed (Fig.7.b - ).
Press OK to select.
User menu
1 Mode Selection
2 Boost
3 Boost Duration
4 Reset FILTER Alarm
5 Night Mode
6 Installer menu
It allows to deactivate the automatic operation of the speed increased via sensors during nocturnal hours.
It operates from 8:00 p.m. to 8:00 a.m (fixed period of time). The sensors have no effect and the unit runs
at the selected continuous speed.
OFF is flashing: use  or  to chance to ON.
Press OK to select.
The factory setting (DEFAULT) is OFF.
User menu
1 Mode Selection
2 Boost
3 Boost Duration
4 Reset FILTER Alarm
5 Night Mode
6 Installer menu
It allows to select the Installer menu.
Press OK to enter the Installer menu.
Press ESC to go back to the previous menu.
Enter
installer menu?
I
7.2 Installer Menu
The Installer menu can be selected either by selecting point 6) in the User menu or by holding Ok+ESC for about 7 seconds.
To exit the installer menu press ESC or wait for about 60 seconds.
It allows to select the language among English, Italiano, Nederlands, Français, Deutsch, Espanol.
Press OK to enter.
Language is flashing: use  or  to choose.
Press OK to select.
The factory setting (DEFAULT) is English.
Installer menu
1 Language
2 Date/Time
3 Bypass
4 Bypass settings
5 Free Cooling
6 Heating
7 Heating Threshold
8 Dehumidification
9 Speed Setting
10 Airflow Balancing
11 F7 filter
12 Filter Alarm interval
13 Working Hours Counter
14 Save settings
15 Load settings
16 Restore Default Settings
17 Contrast
18 Debug page
Use  or  to select the menu.
NOTE:
Menu 4 “Bypass settings” displays only if either Menu 3 “Bypass” or Menu 5 “Free Cooling is set on “YES”.
Menu 7 “Heating Threshold” displays only if Menu 6 “Heating” is set on PRE or POST.
Installer menu
1 Language
2 Date/Time
3 Bypass
4 Bypass settings
5 Free Cooling