AEQ FORUM LITE Скачать руководство пользователя страница 81 | Manualshive

Страница: 81 / 135

AEQ FORUM LITE Скачать руководство пользователя страница 81

AEQ

FORUM

LITE

Ultra-compact digital audio mixer

81

4.2.3.1. Advanced configuration of input channels menu.

Even if all configuration options and possibilities are explained hereunder, it should be taken
into account the on-screen options may vary depending on the inputs/outputs module that the
logical audio channel has been configured for:

•

Headers:

indicates the type and position of the virtual module that is configured at that

moment.

o

"

FRzz Input configuration

" means that we are setting the input of a FR"zz"

type virtual card.

o

"

INPUT HW:xx.0y

" means that we are setting the input "y" of the virtual card

located in the position xx.

•

"

Label

"

:

alphanumeric name of the channel. Maximum number of characters

recommended is 6. This is the name that appears on all displays and menus of the AEQ
FORUM LITE control surface.

•

"

Fader Start

"

:

allows you to select a physical or virtual GPO (from the list defined in

section 4.2.1.1) to perform the Fader-start function for this channel. You can not
associate the same GPO to several channels. "None" indicates there is no Fader-start
function associated with that channel.

«
...
79
80
81
82
83
...
»

Содержание FORUM LITE








































































































































Отзывы:

Нет отзывов