If the output loads should be only powered by AC120V or AC230V, you can change the wire connection as below:
Wiring diagram of 24VDC power input to 120/230VAC power output.
Note: The “IN” terminal should be connected to the “Live” of AC 120V/230V power wire.
All above wiring diagrams show that the Nano Switch uses 2Way or momentary button switches as the external manual
switch for 2Way connection.
The below diagram will show you that the Nano Switch uses the SPDT (SinglePole DoubleThrow) switches as the external
manual switch for 3Way connection.
Wiring diagram of 3Way connection for the external manual switch.
