AENO ATB0002, Инструкция по установке и эксплуатации

Страница: 38 / 44

Installation and Operation Manual
for AENO TB2 electric blender
Document version: 1.0.1, aeno.com © ASBISc Enterprises PLC. All rights reserved
Page 38 of 44
4.2 Warranty service procedure
If you discover an assumed flaw or defect in the device, you should contact an
authorised service centre before the expiry of the warranty and provide the following:
1. The device with an assumed flaw or defect.
2. Original proof of purchase.
In the absence of an authorized service center the customer should contact the store
where the device was purchased.
Warranty service is not available for:
•
adjustment, cleaning and other care of the product as specified in this user
manual;
•
replacement of consumables (batteries, filters, light bulbs, dust bags, etc.)
stipulated in this Instruction Manual.
4.3 Limitation of liability
Products with manufacturing defects are subject to warranty service during the
warranty period. In this case the warranty period is extended by the duration of the
repair.
AENO
TM
products are not eligible for free warranty service if the following damage or
defects are found:
• damage caused by force majeure, accidents, negligence, intentional or careless
actions (inaction) of the buyer or third parties;
• damage caused by the impact of other objects including but not limited to
exposure to moisture, dampness, extreme temperatures or environmental
conditions (or their abrupt change), corrosion and oxidation, as well as contact
with food or liquids, and the effect of chemicals, animals, insects and the excreta
thereof;
•
if the body of the device (or its accessories and components) has been opened
(the integrity of seals has been violated), or the device has been modified or
repaired by any party other than an authorised service centre or using
unauthorised spare parts;
• defects or damage caused by improper use of the device, use other than for its
intended purpose, including use that contradicts the Installation and Operation
Manual;
•
defects caused by normal wear of the commodities, including the bags, device
bodies, battery packs or Installation and Operation Manual;