Installation and Operation Manual
for AENO TB2 electric blender
Document version: 1.0.1, aeno.com
©
ASBISc Enterprises PLC. All rights reserved
Page
44
of
44
8 Glossary
Class II
The electrical safety class that implies protection against electric
shock is provided by the use of double or reinforced insulation.
No enclosure grounding is required. The plug does not have a
grounding contact.
S.S304
AISI 304 (The American Iron and Steel Institute) austenitic steel
with low carbon. AISI 304 stainless steel is acid-resistant and can
withstand short-term elevated temperatures of up to 900
degrees Celsius.
ABS plastic
Shock-resistant technical plastic, widely used in the
manufacture of household products.
PP plastic
Polypropylene, food grade plastic It has high strength and heat
resistance, safe to use with any food.
Borosilicate glass
Silicate glass, where the alkaline components in the raw
material are replaced by boron oxide. It differs from conventional
glass by its higher thermal resistance and increased resistance
to mechanical damage.
WEEE
Waste Electrical and Electronic Equipment means used
electrical or electronic equipment, including all components,
subassemblies, consumables that are part of the equipment at
the time it is taken out of service (including batteries/batteries
(if any), components containing mercury, etc.)
Содержание ATB0002
Страница 2: ......
