AENO ASM0002, Руководство пользователя

Страница: 11 / 116

11 aeno.com/documents
pad (11) to the Velcro of the steam mop
head (10) as shown in fig. J
Jet nozzle
(14) Cleaning corners,
skirting boards, gaps
between tiles and
other hard-to-reach
areas Assemble the mop (see instructions
above). Attach the jet nozzle (14) to the
body of the steam mop (4) according to
figure G
Nylon brush
(12)
Removing
soiling
using a minor
mechanical action
Attach the jet nozzle (14) to the body of the
appliance (see instructions above). Attach
the nylon brush (12) to the jet nozzle (14) as
shown in fig. H
Brass brush
(13) Removing stubborn
soiling using a
mechanical action Attach the jet nozzle (14) to the steam mop
body (4) (see instructions above). Attach
the brass brush (13) to the jet nozzle (14) as
shown in fig. H
Squeegee
(15)
Cleaning glass and
mirror surfaces Attach the jet nozzle (14) to the steam mop
body (4) (see above). Attach the squeegee
(15) to the jet nozzle (14) as shown in fig. I
Crevice
brush (17) Cleaning tile joints Install the jet nozzle (14) on the device body
(4) (see above). Install the crevice brush (17)
on the jet nozzle (14) according to figure J
Operation
1.
Install the required accessories according to the table 1.
2. Plug the power cord plug into a power socket.
3. Press the steam button (7) for 2 seconds to start heating. Wait approx.
15 seconds until two LEDs (8) flash. Press the steam button (7) again to start
operation. Two LEDs (8) light up steadily and steam starts.