AENO AGS0002, Руководство пользователя

Страница: 26 / 39

Manual for the AENO
TM
handheld garment steamer
Document version: 1.0.2, aeno.com © ASBISc Enterprises PLC. All rights reserved
Page 26 of 39
6. When all items have finished steaming, set the “ON/OFF” switch (6) to the “Off”
position and unplug the appliance.
6. Clean the device and accessories as described in section 3.
The device can continuously generate steam until the tank runs out of water (about
7
– 12 minutes).
If the water in the reservoir runs out and the steaming process has not been
completed, follow these steps:
1. Turn off the unit by setting the “ON/Off” switch (6) to the “Off” position.
2. Wait for the steaming head to cool down.
3. Fill the tank with water as described in point 2.2 above.
The steaming head can touch dense natural fabrics, such as denim.
When using the device on delicate or synthetic fabrics, keep it 1 – 2 cm away from the
surface of the fabric, as the steaming head gets very hot.
2.5 Automatic shutdown function in case of overheating
The steamer is equipped with an automatic overheat shutoff function.
If the temperature of the device rises above a certain value, the automatic shutdown
is triggered, all indicators go out, and the steamer stops working.
To return the steamer to operation, disconnect it from the power supply and wait until
the head has cooled completely. After that, the steamer is considered ready for use.
The presence of this function makes working with the device safer.