Manual for the AENO
TM
handheld garment steamer
© ASBISc Enterprises PLC. All rights reserved
Document version: 1.0.2, aeno.com
Page
7
of
39
1.
The device is designed for use in the home, offices and other similar
environments. Do not use it for industrial purposes.
2.
Do not allow children to play with the device.
3.
Do not leave the device near open flames, hot surfaces, heaters.
4.
Before connecting the device to the power source, check that the rated voltage
indicated in the technical documentation corresponds to the electrical voltage
of the outlet.
5.
Connect the power cord to a grounded outlet and disconnect only with dry
hands. Do not use an extension cord.
6.
Fill the tank with clean, distilled water only, without the use of detergents.
7.
Before turning on the device, make sure that the water tank is installed
correctly, the hole in it is closed with a plug.
8.
Do not remove the water tank while the device is in operation. Do not turn on
the steamer if the water tank is empty. This can cause the device to
malfunction.
9.
During operation, the surface of the steaming head can get very hot. Handle
the unit with care to avoid burns. When finished, do not touch the steaming
head until it has cooled completely. Make sure that children or animals do not
touch the hot steaming head.
10.
Do not lean the hot steam head of the device against pieces of furniture or other
interior elements to avoid damaging them.
11.
Before using the device, make sure that the fabric to be ironed is resistant to
high steam temperatures (at least 145 °C). Check the care information on the
label.
12.
Never steam clothes on yourself, other people or animals.
13.
The device is designed for steaming textiles. Do not use it to clean hard surfaces
made of glass, wood or metal.
14.
Never point the steam jet at people, animals, plants, electrical appliances,
explosive, corrosive or toxic substances
.
15.
Place the power cord so that it cannot be accidentally stepped on or snagged.
16.
Do not place the power cord on anything with a sharp edge and do not place
anything on top of the cord.
17.
Make sure that the power cord does not hang over the edge of furniture or
touch surfaces that can damage the insulation.
18.
Do not wrap the power cord around the device.
19.
If the power cord is damaged, first unplug the power outlet, then unplug the
device. The power cord should only be replaced by a service technician.
20.
Always unplug the power cord after using or cleaning the device.
21.
Allow the unit to cool completely (may take up to 1 hour) before cleaning or
storing it.
Содержание AGS0002
Страница 1: ...Manual for the AENOTM handheld garment steamer Models AGS0002 AGS0002 UK Version 1 0 2 20 04 2023 ...
Страница 2: ......
Страница 38: ......
Страница 39: ......
