AENO AAP0004, Инструкция по установке и эксплуатации

Страница: 25 / 43

Installation and Operation Manual
AENO
TM
air purifier
© ASBISc Enterprises PLC. All rights reserved Document version: 1.0.2, aeno.com
Page 25 of 43
2 Installation and operation
To ensure the proper operation of the AENO AAP0004 air purifier, follow these steps:
• Unpack the device (see point 2.1) and plug it into a power outlet using the power
adapter.
• Controle the device via the touch panel (see point 1.5)
WARNING!
When connecting, operating and storing the AENO air purifier, follow the rules
for safe use of the device (see the "Limitations and Warnings" section).
2.1 Unpacking and preparing for operation
Figure 6 – Unpacking and Installation
•
Carefully open the package and remove the device and accessories.
•
Open the bottom cover of the unit (see Figure 6-a) and make sure that there is
no plastic filter package. If plastic package is present, remove the filter from the
device, remove the package and place the filter back in the device. Close the
cover of the device.
• Install the device in the selected location on a flat, stable, horizontal surface (see
Figure 6-b).