AEMC PowerPad 3945-B Скачать руководство пользователя страница 9

Страница: 9 / 108

Power Quality Analyzer Model 3945-B

CHAPTER 1

INTRODUCTION

Warning

• Never use on circuits with a voltage higher than 600V and an overvoltage

category higher than CAT III or IV (probe dependant)

• Use in indoor environments only.
• Only use accessories that are compliant with the safety standards

(IEC 664-1 Ed. 92) 600V min and overvoltage CAT III or IV.

• Only use factory specified replacement parts.
• Always disconnect the power cord, measurement leads and sensors be

fore replacing the battery.

1.1 International Electrical Symbols

Signifies that the instrument is protected by double or reinforced insulation.

CAUTION - DANGER!

Read the User Manual.

Risk of electric shock. The voltage at the parts marked with this symbol may

be dangerous.
Refers to a type A current sensor. This symbol signifies that application around

and removal from HAZARDOUS LIVE conductors is permitted.
Refers to a type B current sensor. Do not apply around or remove from HAZARD-

OUS LIVE conductors without additional protective means (de-energizing the

circuit or wearing protective clothing suitable for high voltage work).

Important instructions to read and understand completely.

Important information to acknowledge.

USB socket

The CE marking guarantees conformity with European directives and with

regulations covering EMC.

The trash can with a line through it means that in the European Union, the
product must undergo selective disposal for the recycling of electric and
electronic material, in compliance with Directive WEEE 2002/96/EC.

Содержание PowerPad 3945-B













































































































Результаты поиска

Содержание PowerPad 3945-B

Отзывы:

AEMC PowerPad 3945-B, Руководство пользователя, Страница: 9 / 108

Результаты поиска

Содержание PowerPad 3945-B

Отзывы: