AEMC PowerPad 3945-B Скачать руководство пользователя страница 18

Страница: 18 / 108

Power Quality Analyzer Model 3945-B

2.4 Battery Charge Status

Battery Charging

25%

•  Battery capacity level relative to full charge
•  % of total capacity already charged (between 0 and 99%)
•  Battery sign and % are blinking

Battery Full

100%

• Battery sign and % are fixed
• % of total capacity is at 100%

Battery Discharging

25%

•  Battery capacity level relative to full charge
•  % of the remaining capacity
•  Battery sign and % are fixed

Battery Empty Discharging

• % of total capacity reads 0%
• Battery sign and % are fixed

New Battery Charging

•  Fixed battery capacity level
•  Question mark showing unknown capacity level
•  Battery sign and % are blinking

New Battery Discharging

•  Fixed battery capacity level
•  Question mark showing unknown capacity level
•  Battery sign and % are fixed

WARNING:

The battery may fully discharge when recording for long periods

of time while not connected to a power supply. The PowerPad

will con-

tinue to record for some time, even if below the minimum battery charge
value. However, the display may not come back on, and will eventually stop
saving data when the battery is too low. All data recorded will be saved.

If in the Record Mode, and the display does not come ON, supply power to
the PowerPad

with the line cord and the display will come back ON when

any button (other than ON/OFF) is pressed.

NOTE:

When the 3945-B is stopped using the

button, a confirmation is

requested if the equipment is in the process of recording.

NOTE:

Line cord is plugged in

NOTE:

Line cord may or may not

be plugged in

NOTE:

Line cord is not plugged in

NOTE:

Line cord is not plugged in

NOTE:

Line cord is plugged in

NOTE:

Line cord is not plugged in

Содержание PowerPad 3945-B













































































































Результаты поиска

Содержание PowerPad 3945-B

Отзывы:

AEMC PowerPad 3945-B, Руководство пользователя, Страница: 18 / 108

Результаты поиска

Содержание PowerPad 3945-B

Отзывы: