AEMC PowerPad 3945-B Скачать руководство пользователя страница 74

Страница: 74 / 108

Power Quality Analyzer Model 3945-B

6.4 Common Functions

The buttons described below appear on several DataView

Setup Screens.

•

Re-Read from Instrument:

Reads the current configuration of the

PowerPad

attached via the serial cable.

•

Save to File:

Saves the current configuration. This file will reside on

the computer’s disk drive. Saving different configuration setups can be

useful for future functions and tests.

•

Load from File:

Retrieves a saved file from the computer’s disk drive to

be used in programming the PowerPad

•

OK:

Closes the dialog box and brings up the Control Panel.

•

Cancel:

Exit without saving configuration.

•

Apply:

Programs the PowerPad

using the current settings without

closing the window.

•

Help:

Opens the online Help.

6.5 Configuring the Instrument

The Configure dialog box lets you configure every aspect of the Model 3945-B

PowerPad

. Each field is identical to the programmable features available from

the instrument’s front panel itself.

Several of the functions are configured by typing the appropriate value in the field

provided. Others are configured by clicking on the appropriate radio button or Icon,

such as, selecting the current probe.

To configure the instrument, go to

Instrument > Configure

or select

Configura

tion

from the Instrument Tree.

Содержание PowerPad 3945-B













































































































Результаты поиска

Содержание PowerPad 3945-B

Отзывы:

AEMC PowerPad 3945-B, Руководство пользователя, Страница: 74 / 108

Результаты поиска

Содержание PowerPad 3945-B

Отзывы: