8
Digital Transformer Ratiometer DTR
®
Model 8510
2.2
Control Features
50V CAT IV
OFF/
CHARGE
ON
ENTER
MEM
TEST
CONTRAST
DIGITAL TRANSFORMER RATIOMETER
DTR
®
MODEL 8510
USE SPECIFIED
CHARGER ONLY
USE ONLY ON DE-ENERGIZED TRANSFORMERS
H
X
5
2
1
3
4
6
7
8
10
11
9
1. Display:
Displays data, status and control features of the instrument.
2. USB Connector:
Allows connection to a computer for instrument
configuration set-up and status check, downloading of the stored
data using the DataView
®
software and running a test..
3. High-side “H” Cable Connector (primary):
Connection for the
primary side of the transformer.
4. Low-side “X” Cable Connector (secondary):
Connection for the
secondary side of the transformer.
5. Battery Charge Input Connector:
Allows the smart charger to
charge the batteries.
6. Power Switch:
Turns the instrument ON or OFF (if the charger is not
connected). If the charger is connected, the batteries charge in OFF/
CHARGE position.
7. Operation and Battery Low Indicator:
Green LED indicates that
the instrument is on and blinks when the batteries are getting low
(<12V). The instrument will completely shut down when the batteries
are below 8.7V.
www.
ShopAEMC
.com
Shop for AEMC products online at:
1.877.766.5412
