AEMC 6470-b Скачать руководство пользователя страница 3

Страница: 3 / 69

READ CAREFULLY BEFORE

USING FOR THE FIRST TIME

•

Long battery charge life for a limited volume and weight.

•

Possibility of quickly recharging your battery.

•

battery even if it is not fully discharged.

•

or cadmium, in compliance with the applicable regulations.

After prolonged storage, the battery may be completely discharged. If so, it must
be completely recharged.

Your instrument may not function during part of this recharging operation.

•

Only use the charger supplied with your instrument. Use of
another charger may be dangerous.

•

Only charge your instrument at temperatures between 0° and 40°C.

•
•

manual.

NiMH technology allows a limited number of charge/discharge cycles depending

•

The conditions of use.

•

The charging conditions.

Please refer to § 9 for correct replacement of the battery.

Do not dispose of the battery pack with other solid waste. Used batteries

specialized in processing hazardous materials.

www.

.com

[email protected]

1.800.561.8187

Содержание 6470-b






































































Результаты поиска

Содержание 6470-b

Отзывы:

Похожие инструкции для 6470-b

Бренды по названию

Популярные бренды

AEMC 6470-b, Руководство пользователя

Результаты поиска

Содержание 6470-b

Отзывы:

Похожие инструкции для 6470-b

Бренды по названию

Популярные бренды