AEMC 6470-b, Руководство пользователя

Страница: 61 / 69

To reduce R
H
, you can add one or more electrodes, 2 meters apart from each
other, in the H (Z)
To reduce R
S
, you can add one or more electrodes, 2 meters apart from each
other, in the S (Y) leg of the circuit.
the ground around them well, or dampen them with water.
passive
the terminals and that the measurement is impossible.
active measurement means that the operat
there is an incorrect connection.
cates that measurement current I
ES
or I
SEL
is too low.
interfere with the measurement. You should change to manual mode and change
• Values R
H
and/or R
S
are too high,
• Measurement current I , I
ES
or I
SEL
is too low,
• The instability of the measurement is large.
www. .com
information@itm.com 1.800.561.8187