AEM 26-3000C, Руководство по установке

Страница: 5 / 7

5
c. Install one of the bolts removed in step 2c loosely into
the top-rear flange location on the turbocharger.
d. Lower your new AEM charge pipe into position and
install beginning with the top end at the intercooler and
slide lower end into position to install the other flange
e. Loosely install the smaller coupler and clamps onto
your valve of choice (factory valve shown).
f. Re-route vacuum line through the intake manifold as
shown above. Use the other included cap to protect the
exposed steel line if desired.
g. Using hose removed in step 2d and connector (Item
10), install your valve and assemble the vacuum supply
line as shown.
(d. cont.) bolt. Ensure that the O-ring remains seated.
Torque both bolts to 80 in-lbs and intercooler hose
clamps to 30 in-lbs.