4
e. Release engine cover clips and remove engine cover
by lifting up firmly on the front of the cover.
f. Loosen clamp securing the charge pipe to the inter-
cooler enough to move the clamp off of the joint.
g. Using pliers, disengage the spring clamp securing the
valve to the intake housing and slide it down.
h. Lift straight up on the valve outlet while supporting
the inlet to remove the factory charge pipe from the
engine.
a. Install the 2.75” coupler onto the intercooler inlet
with its corresponding hose clamps. Do not tighten.
3. Installation of AEM
®
Charge Pipe.
a. When installing the charge pipe, do not completely tighten the hose clamps or mounting hardware until
instructed to do so.
b. Remove the O-ring from the factory charge pipe and
install into your new AEM charge pipe with care to orient
the tab in its corresponding groove.
Содержание 26-3000C
Страница 2: ...2 ...
