21
8
Forklift or chartered buses are recommended
for moving the refrigerator before unpacking.
For forklift, the refrigerator shall be accessed
from the bottom of the wood bracket of the
refrigerator box side.
For chartered buses, the refrigerator shall be
accessed from the bottom of the wood bracket,
and it can be clipped up from both sides of the
box only.
For safe transportation, equipment of this
series is fixed on wooden base by metal flat.
Please unscrew the screws and rotate the
metal flat to be hidden at the bottom of
equipment before using
（
Fig.1
）
.
Casters are recommended for moving the
refrigerator after unpacking.
Fig.1
Fig.2
Fig.3
The maximum tilt angle of the refrigerator shall
be no more than 45° during the course of movement.
Preparation before use
1. Remove the packaging materials and strings
Remove all packaging materials and strings
for transport.
> 300cm from the top
> 10cm from
the back
> 10cm from
the left
> 10cm
from the
right
2. Count refrigerator accessories accompanied
Check the articles inside the refrigerator against
the packing list; if any difference, contact the
after-sale service.
3. Placing conditions
Leave a gap of 10cm in minimum around the
refrigerator for ventilation and heat dissipation
(
Fig.2
)
.
4. Adjust bracing foot
Rotate the leveling feet with wrench in clockwise
direction to extend them outward and support on
the ground. Make sure the refrigerator will not
move during operation(Fig.3).
Supporting foot
Downward
upward
Clean the back evaporating box
Evaporating box is installed on the back of the refrigerator.
Remove 2 screws on the bottom, loosen the upper 2 screws
(no need to remove them), lift the evaporating box and take
it out.
Clean the evaporating box.
Reinstall the evaporating box, screw 4 screws firmly.
Clean the box every month. If the refrigerator is used in high
temperature and high humidity environment, do the cleaning
at least 3 times per month.
The upper screw
Evaporating Box
The bottom screw
Cleaning and Maintenance
Lamp replacement
The refrigerator is equipped with a LED lamp. The lamp has low energy consumption and long
service life. Any doubt, please contact the after-sales service personnel for changing it.
Component Cleaning
To avoid electric shock or staff injuries, please switch off power of the
refrigerator before conducting any repairment or maintenance.
Make sure no drug or aerosol around the refrigerator is inhaled during
maintenance, otherwise your health will be threatened.
Refrigerator cleaning
Clean the refrigerator once a month. Regular cleaning keeps appearance of the refrigerator new.
Wipe off dust in enclosure, inner chamber and all accessories of the refrigerator with dry cloth. If
the refrigerator is dirty, sweep away dirt with cleaning cloth which has been immersed in neutral
detergent and wipe off residual detergent with wet cloth, then with dry cloth.
Do not dump water on enclosure or inner chamber of the refrigerator, otherwise electrical
apparatus insulation may be damaged, causing occurrence of faults.
The compressor and other mechanical parts are completely sealed. No lubrication is required.
