AEG SR 4371 BT, Инструкция по эксплуатации

Страница: 51 / 86

English
51
PC/AUX IN socket
To connect analogue replay devices. Via this socket you can
also hear the sound of other playback devices such as MP3
players, CD players etc. through the loudspeakers.
1. Please connect the external device with a 3.5 mm stereo
jack plug to the PC/AUX-IN socket.
2. Repeatedly press the FUNCTION button (11), until “AUX”
is shown in the display.
3. You will hear the sound playback from the external device
through the loudspeakers. You may use the VOLUME
control (18) to adjust the volume. The CD buttons are not
functional.
4. For the remaining procedure please see the operating
instructions of the external sound source.
NOTE:
Adjust the volume of the external device to a comfortable
level.
Cleaning and Maintenance
WARNING:
Do not immerse the device in water.
• Always remove the mains plug before cleaning the
machine.
• Any marks on the surface can be wiped off with a slightly
damp cloth without any additives.
Troubleshooting
Symptoms Course Solution
CD can not be
played back. CD is not inserted
or inserted incor-
rectly. Ensure that the disc is
inserted with the label
facing upwards.
Batteries too weak. Insert new batteries
or operate the device
with the mains lead.
CD jumps dur-
ing playback. Check the disc for
fingerprints, dirt or
scratches. Check the disc for
fingerprints, dirt or
scratches.
Device cannot
be operated. Device crashes and
“hangs”. Disconnect the power
supply for 5 sec. Then
switch the device on
again.
Symptoms Course Solution
No audio signal
during blue-
tooth connec-
tion. The device is not
registered with the
audio source. Ensure that there is a
connection. Register
the device with the
audio source again, if
necessary.
Volume too low. Increase the volume
on the device.
Increase the volume
on the audio source.
Device can not
be connected. Registration does
not work. Check to see if the
audio source supports
the A2DP protocol.
Audio source is
shut off. Turn on the audio
source.
Bluetooth is shut
off on the audio
source. Turn on the Bluetooth
function on the audio
source.
Bluetooth version
is not supported. Use a different play-
back device.
Technical Data
Model: ............................................................................. SR 4371 BT
Power supply: ...............................................100-240 V~, 50/60 Hz
Battery operation: ..................................8 x 1.5 V, Type UM2/R 14
Power consumption:.................................................................40 W
Protection class: ................................................................................II
Net weight: ............................................................... approx. 2.3 kg
Radio section:
Frequency ranges: ...............................FM 87.5 ~ 108.0 MHz
Bluetooth
Bluetooth support: ....................................... ............. .................V3.0
Range: ..................................................................approx. 15 metres
Transmission frequency: ......................................2.402-2.480 GHz
Protocoles: ..................................................................A2DP/AVRCP
The right to make technical and design modifications in
the course of continuous product development remains
reserved.
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance
with the latest safety regulations.