AEG SR 4371 BT, Инструкция по эксплуатации

Страница: 46 / 86

English
46
WARNING:
Avoid damage to your hearing with volume that is too high.
CAUTION:
Do not touch the loudspeaker membranes (A) with your
hands or with objects. The membranes can get damaged
that way.
Overview of the Components
1 USB port
2 PC/AUX IN input
3
headphone connection
4 EQ/ID3 button (Equalizer/ID3 tag metadata)
5 Telescopic antenna
6 CD compartment
7 PUSH TO OPEN button (open CD tray)
8
/ buttons
9 / button
10 TUNING control
11 FUNCTION button
12 button
13 STANDBY control lamp (operating state)
IR sensor for the remote control
PAIR control lamp (Bluetooth)
14 Carrying handle
15 Display
16 LIGHT button (lighting effect)
17 STANDBY button
18 VOLUME control
19 MEM/PROG/P-MODE button
20 10/FOLD/M buttons
A Loudspeaker membranes
Reverse (not shown)
AC Mains connection
Bottom (not shown)
Battery compartment
Remote control
1 MUTE button (mute)
2 STANDBY/ button (operational readiness)
3 MO/ST button (Mono/Stereo)
4 VOLUME buttons (volume)
5
button (playback/ pause)
6 TUN+/ button (radio station search upward/ next track)
7 PAIR button (disconnect current Bluetooth connection)
8
button (stop)
9 P-MODE button (playback mode)
10 TUN-/ button (radio station search downward/ previous
track)
11 ID3 button (ID3 tag Meta data on/off)
12 FOLD./10/M. buttons (album/ respectively 10
select tracks/ stored radio stations)
13 LIGHT button (lighting effect)
14 MEM button (storing)
15 FUNC. button (function mode)
16 EQ button (equalizer)
Start-up of the device/Introduction
• Select a suitable location for the device, such as a dry,
flat, non-slip surface on which it is easy to operate the
machine.
• Ensure that the device is sufficiently ventilated!
• Sensitive surfaces, such as the display, might be protect-
ed with films. Remove such films.
Power Supply
• Ensure that the voltage is the same as that indicated on
the model identification plate.
• Connect the power cable supplied (see battery compart-
ment if necessary) to a properly installed safety power
socket and the mains connector AC on the back of the
machine.
NOTE:
If the device is not used for a longer period of time, the
mains plug must be pulled from the socket.
Inserting the Batteries (not supplied)
1. Open the battery compartment cover on the bottom of
the device.
2. Insert 8 batteries of type UM2/R14 1.5 V. Please ensure
that the polarity is correct (see the floor of the battery
compartment)!
3. Then close the battery lid.
NOTE:
When a mains cable is connected the batteries are auto-
matically switched off.
CAUTION:
• Batteries may leak and lose battery acid. If the device
is not used for a longer period of time, remove the
batteries.
• Different battery types or new and used batteries must
not be used together.
• Batteries are not to be disposed of together with
domestic wastes. Dispose of the used batteries at the
relevant collection bin or at your dealer’s.
WARNING:
The batteries shall not be exposed to excessive heat such
as sunshine, fire or the like.
Danger of explosion!