AEG SR 4370, Инструкция по эксплуатации

Страница: 52 / 74

52
English
52
SR4370CD-DAB-USB_IM 27.05.16
The instructions for setting alarm time 1 are given below:
1. Switch the device to standby with the STANDBY button.
2. Press the ALARM 1 button. “ “ appears on the display
and the hours for the switch-on time fl ash.
3. Set the hours with the UP / DOWN buttons.
4. Confi rm your setting with the ALARM 1 Button. The
minute digits start fl ashing.
5. Set the minutes with the UP / DOWN buttons.
6. Save the alarm time with the ALARM 1 button.
The activated alarm will be displayed in standby mode with
the symbol “ “ for the fi rst alarm and the symbol “ “ for
the second alarm.
NOTE:
For technical reasons, the activated function cannot be
displayed during the operation of the display.
Turn off the Alarm Signal
Press the button STANDBY to stop the alarm signal.
Snooze
The automatically set alarm function can be switched off for
9 minutes with the SNOOZE button.
NOTE:
If the snooze function is activated, the notifi cation
“SNOOZE” will appear in the display.
Deactivate Alarm Function
1. Switch the device to standby.
2. Press the ALARM 1 button or the ALARM 2 button. The
symbol for the fi rst or the second alarm will disappear.
Cleaning and Maintenance
CAUTION:
Do not immerse the device in water.
• Always remove the mains plug before cleaning the
machine.
• Any marks on the surface can be wiped off with a slightly
damp cloth without any additives.
Troubleshooting
Problem Cause Solution
The unit
cannot be
operated The unit is
blocked and
“hangs” Disconnect the power
supply for 5 seconds.
Then switch the
device on again.
Reset the device to
the factory defaults.
see “Settings menu”
Problem Cause Solution
No DAB Radio
reception Telescopic an-
tenna incorrectly
aligned Fully extend the
telescopic antenna
and align it vertically.
No Digital Radio
can be received
in your area
Problems with
DAB radio
reception Depending on
the location, you
may not be able
to receive some
stations at all or
with interference
in your region
.
see also note on
page 49
Switch to FM mode to
receive these stations.
If these stations are
transmitted via VHF.
Find out more on the
internet site of the
radio station.
No sound Volume is too
low Increase the volume
Poor sound
quality Radio signal too
weak Try to adjust the
antenna position.
Alarm function
does not
sound Volume set too
low Increase the volume
with the control (7).
CD can not be
played back. CD is not insert-
ed or inserted
incorrectly. Ensure that the disc is
inserted with the label
facing upwards.
Batteries too
weak. Insert new batteries
or operate the device
with the mains lead.
CD jumps
during play-
back. Check the disc
for fi ngerprints,
dirt or scratches. Check the disc for
fi ngerprints, dirt or
scratches.
Technical Data
Model: ....................................................SR 4370 CD / DAB+ / USB
Power supply: ............................................................. 230 V ~, 50 Hz
Battery operation: ..................................6 x 1,5 V, Type UM 2 /R 14
Power consumption:.................................................................15 W
Protection class: ..............................................................................
Ⅱ
Net weight: .............................................................. approx. 1.57 kg
Radio section
Frequency ranges: ..................................FM 87.5 ~ 108.0 MHz
........... DAB/DAB+ 174.92 ~ 239.20 MHz
The right to make technical and design modifi cations in
the course of continuous product development remains
reserved.
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance
with the latest safety regulations.