AEG SR 4370, Инструкция по эксплуатации

Страница: 48 / 74

48
English
48
SR4370CD-DAB-USB_IM 27.05.16
1. Press the SETUP button.
2. Select the menu item “Hauptmenü” with the UP / DOWN
buttons. Confirm with the ENTER button.
3. Select the menu item “Sprache” with the UP / DOWN
buttons. Confirm with the ENTER button.
4. Select the desired language with the UP / DOWN buttons.
Confirm with the ENTER button.
NOTE:
The menu is described with the selected language
“ENGLISH” in the instruction manual.
Setting the Time of the Device Manually
If the device is in standby mode, the display will indicate the
time. It can be set as follows:
• By using the buttons UP / DOWN you can make the
settings.
• Press the PRE / CLK button to confirm your setting.
1. Switch the device to standby with the STANDBY button.
The current time will appear on the display.
2. Keep the PRE / CLK button pressed. The notification
“24 HOUR” will appear on the display.
3. Set the time display format (24 or 12 hours), the hours and
the minutes one after the other.
NOTE:
• In 12 hour display AM = morning, PM = afternoon
appears.
• The clock time settings will be erased in the event of
power interruptions.
General operation
Function Selector Switch (6)
With the function selector switch, you select the operating
mode. The device is switched off when the switch is set to
“BUZZER / OFF”.
STANDBY button (24)
With this button you can switch the device to standby. In
standby mode, the current time appears on the display.
NOTE:
In CD / USB mode: After about 15 minutes with no signal,
the device will automatically switch to standby. In order to
use the device again, press the STANDBY button.
Volume Control (7)
Adjust to your preferred volume level.
Delayed shut-off (SLEEP)
The device automatically switches off when the selected time
is reached.
1. Press the SLEEP button. “SLEEP 90“ appears on the
display.
2. Press the SLEEP button repeatedly to select the time after
which you want the device to switch off. Select between
90 to 10 minutes in increments of 10 minutes.
NOTE:
• Briefly press the SLEEP button in order to display the
remaining time.
• The activated setting is shown on the display by the
symbol “ zz “. For technical reasons, the symbol is hidden
depending on the displayed on-screen information.
EARPHONE Headphone jack (5)
For headphone operation, use headphones with a 3.5 mm
jack plug that you plug into the headphone jack of the
device. The loudspeakers will be shut off.
Listening to the radio
Hints for FM / DAB Reception
• The FM and DAB reception are dependent on the
location.
Follow the steps below:
-
Completely extend the telescopic antenna.
-
For FM: If necessary, change the position of the
telescopic antenna to improve the reception.
-
For DAB: For optimal DAB reception, we recommend
to align the telescopic antenna vertically.
• Depending on the location, some station may not be
received in your region or only with interference.
• When playing a radio station, the time and date is taken
from the broadcasting service.
• The FM and/or DAB supplementary information (RDS /
DLS) may differ. This is selected and transmitted individ-
ually by the broadcast stations. If the reception quality at
your location is inadequate, the supplementary informa-
tion may be displayed incorrectly or not at all. This is
not a
malfunction of the device!
Scan FM Stations
3. Set the function selector switch (6) to the “FM” position.
4. You have two options for tuning a station:
Automatic Station Scan:
Important! Any previously stored radio stations will be
overwritten.
-
Press the AUTO SCAN button. The radio stations found
are stored in ascending order of frequency.
Manual Scan for Radio Stations:
-
Press the UP / DOWN buttons to set the station
frequency.
-
If you keep the UP / DOWN buttons pressed, the
device will search for the next or previous radio station.
5. If the reception is too weak and there is noise on the
received station, try to improve the reception by changing
the position of the telescopic antenna.