AEG SR 4348 BT, Инструкция по эксплуатации

Страница: 22 / 26

English
22
Overview of the Components
1 USB Connection
2 Battery compartment
3 Operating mode switch (CD/USB; Radio; Bluetooth/AUX)
4 Mono/Stereo selector switch
5 AUX input 3.5 mm
6 On/Off switch
7 230 V connection
8 Carrying handle
9 CD tray
10 Loudspeakers.
11 Open CD tray
12 Stop button
13
button (replay/pause)/Automatic search radio
14 button Search forwards/Radio s
15 Volume knob
16 Display
17 button search run backwards/Radio station –
18 PRG button/
19 Repeat button/Tuning –
20 Receiving antenna
Putting the device into operation/
Implementation
• Carefully read the operating instructions before the com-
missioning.
• Select a suitable location for the device and the loud-
speakers. Ensure an even and non-slip surface.
• Take care to provide sufficient ventilation for the device.
Power supply
• Plug the mains plug into the properly installed wall
socket, 230 V, 50 Hz.
• Ensure that the mains voltage corresponds with the type
plate.
• The device can alternatively also be equipped with 6
C batteries. For this purpose, slide open the battery
compartment in direction of the arrow and insert the bat-
teries with the correct polarity. Then reclose the battery
compartment.
WARNING:
Do not expose the batteries to any high heat input
such as direct sunlight, for example. There is a risk of
explosion.
CAUTION:
• Unequal batteries or new and spent batteries may not
be used together.
• Batteries must not be disposed off in the household
wate. Please dispose of spent batteries at the appropri-
ate collection points or return them to the distributor.
Transport lock CD tray
• Open the CD tray (2) by pressing the button (19).
• Remove the transport lock from the CD player, if present,
before commissioning.
• Close the CD tray by pressing the button (19).
General operation
On/Off switch (6)
You will turn the device on (I) and off (0) with this button.
Volume MIN/MAX (15)
Use this turning knob to adjust the volume to your individual
needs.
USB connection (1)
This device has been developed according to the latest state
of the technical developments in the USB field. The large
number of different USB storage media of any kind that are
offered nowadays do unfortunately not guarantee that a full
compatibiity with all the USB storage media is ensured. It is
for this reason in rare cases that it can result in problems when
replaying USB storage media . This is
not an error function of
the device.
To start the USB replay, proceed as follows:
• Turn the device on.
• Slide the operating mode switch (3) to the “CD” position.
• Keep the button pressed down until “USB” is shown in
the display.
• Connect a USB storage medium with music files.
• Press the
button (13) to start the replay.
For more operating options plrease refer to the chapter Play-
ing CDs/MP3.
Listening to radio
To restart the radio replay, proceed as follows:
• Turn the device on.
• Slide the operating mode switch (3) to the “Radio” posi-
tion.
• Set the desired station with the buttons /-. The
frequency will thereby be shown in the LCD display (16).
• The display (ST) is shown in the LCD display during an
optimal reception of the station. Reposition the antenna
in case of bad radio reception. Should the radio recep-
tion be disturbed by static, you can reset the replay to
mono operation with the switch (4).
• Start automatic station search with the button Play/
Pause (13)/Station search.
Playing CDs/MP3
Replay of a CD
To play back an audio CD, please proceed as follows: