AEG SR 4348 BT, Инструкция по эксплуатации

Страница: 23 / 26

English
23
• Turn the device on.
• Slide the operating mode switch (3) to the “CD” position.
• Open the CD tray (9) by slightly pressing on the right
front (11).
• Insert a CD into the device with the label on top. Ensure
that the CD locks in on the centring taper.
• Close the CD tray (9) by pressing it shut until it locks into
place.
When the CD is inserted, the total number of the CD titles
will be displayed. The display will also show you whether it
pertains to an audio CD or an MP3 CD. If you press the
button (replay/pause) (13), the replay will start.
To remove a CD, please proceed as follows:
• Press the stop button (12).
• Open the CD tray (11) by slightly pressing on the front
right (11).
• Carefully remove the CD from the centring taper.
• Close the CD tray.
NOTE:
If you insert a CD upside down or if it is not readable,
then the display will read “no”.
The replay of self-produced CD’s can not be guaranteed
due to different burn programs and storage media.
Description of the CD buttons
button (Replay/Pause) (13)
By pressing this button during the replay you may stop the
replay. If you press the button again, the replay will continue.
/ buttons (Search run forward/backwards) (14/17) With
these buttons you can affect the music replay in the CD/USB
mode.
You can use the button to skip a title and to change to the
next title.To do this, please proceed as follows:
• Press the button briefly to skip to the next title.
• By pressing down and holding the button, the music
search is activated. The title is not changed but is wound
forward in fast forward mode.
With the button you wil proceed as follows:
• Pressing it 1x, will change it to the start of the current title.
• By pressing it 2x, it will change to the previous title.
• Pressing it 1x and holding it down will activate the music
search run backwards.
REPEAT (19) button
This button enables you to set different options of music
replay. To do this, procced as follows:
• Pressing 1x repeats the current title until the function is
deactivated. “ONE” will be shown in the display.
• Pressing 2x will replay the entire CD until the function is
deactivated. “ALL” will be shown in the display.
If the button is pressed again, the function is deactivated
again. The replay will run in the normal mode.
Programmed playback
Allows the programming of any desired order of selections.
To program the order of selections, please proceed as fol-
lows:
• Insert a music medium (Audio – CD / MP3 - CD/ USB
stick)
• Press the PRG (18) button. “001” will appear in the
display.
• Now select the requested title with the / buttons
(14/17).
• Press the PRG (18) button again. “002” will appear in the
display
• Select another title.
• Proceed the same way with the further programming.
• You will start the playback with the
button (13).
To delete the programming, press the button (12).
Bluetooth Streaming/AUX
To playback music through the Bluetooth or AUX, please
proceed as follows:
• Slide the operating mode switch (3) to the “Bluetooth/
AUX” position.
• Pair your music output device with Bluetooth with the
device. The Bluetooth password of the device is “0000”.
You may alternately connect the music output source by
using a 3.5 mm jstereo jack plug with the AUX terminal (11)
of the device.
• Select the desired music titles.
• Start the playback.
NOTE:
Before you start the replay, ensure a moderate output
volume of the music source and of the device. Adjust
the volume later on.
Cleaning and maintenance
To clean the device, please proceed as follows:
• Separate the device from the mains.
• Wipe the outer surfaces of the device with a dry towel
without any cleaning additives.
Troubleshooting
Symptoms Cause Solution
CD can not be
played back. CD has not been
inserted correctly. Ensure that the CD
has been inserted
correctly.
CD skips during
the playback. CD is dirty. Clean the CD with
a soft, dry towel.