36
R
R
R
R
M
M
L
P
●
Remove the telescopic chimney support M
M
M
M
M by unscrewing
the side screws R
R
R
R
R (one on each side - these screws must be
kept). Fig. 6
Fig. 6
Fig. 6
Fig. 6
Fig. 6.
●
Remove the air pipe L
LL
L
L from the telescopic chimney
support M
M
M
M
M; to do this, unscrew the four screws (Ø 2,9 x
9,5 mm) fixing the air pipe to the support (these screws
must be kept). Fig. 6
Fig. 6
Fig. 6
Fig. 6
Fig. 6.
●
Fit the telescopic chimney support to the wall, at a point
close to the ceiling. The telescopic chimney support has a
reference mark P
P
P
P
P, which must coincide with the line that
you have already drawn on the wall. Fig. 6
Fig. 6
Fig. 6
Fig. 6
Fig. 6.
●
Using a pencil, mark the two holes required to fix the
support, and drill the holes (Ø 8 mm). Fig. 6
Fig. 6
Fig. 6
Fig. 6
Fig. 6.
●
Insert two plugs and fix the telescopic chimney support M
M
M
M
M
using 2 screws size (5x45 mm). Fig. 6
Fig. 6
Fig. 6
Fig. 6
Fig. 6.
●
During installation the plug must not be connected to the
power supply.
Fig. 6
Fig. 6
Fig. 6
Fig. 6
Fig. 6