AEG protect d. 2000, Инструкция по установке и эксплуатации

Страница: 9 / 25

34
Installation Installation
Installation Installation Installation
●
Rest the template correctly against the wall. The lower
corner of the template corresponds to the lower corner of
the extractor hood. Fig. 3.
Fig. 3. Fig. 3. Fig. 3. Fig. 3.
●
A cross is marked
on the template
to indicate the
centre. Mark
this point on
the wall. Fig. 3.
Fig. 3. Fig. 3. Fig. 3. Fig. 3.
●
Drill two holes (Ø 8 mm) in the
wall at the points indicated,
insert the stops (Ø 8 mm) and
screw in the hooks provided.
Fig. 3.
Fig. 3.
Fig. 3. Fig. 3.
Fig. 3.
●
Hang the hood and adjust its
position using the screws on the
hooks. Fig. 4.
Fig. 4.
Fig. 4. Fig. 4.
Fig. 4.
●
The reference point “a a a a a”
marked on the body of the
extractor hood must coincide
with the line you have drawn
on the wall. Fig. 4.
Fig. 4.
Fig. 4. Fig. 4. Fig. 4.
●
Once the extractor hood has been correctly aligned,
remove the grease filter.
Fig. 3 Fig. 3 Fig. 3 Fig. 3 Fig. 3
Fig. 4 Fig. 4
Fig. 4 Fig. 4
Fig. 4