23
5.1
Check
Remove the UPS from its transport packaging and check that it has
not been damaged in transit. If you find any damage, pack the unit up
again and send it back to where you purchased it.
5.2
Placement and Storage
Conditions
Install the UPS in a protected area that is free of excessive dust and
has adequate air flow around the unit, and is free from excessive dust,
corrosive fumes and conductive contaminants. Please place the UPS
away from other units at least 20 cm to avoid interference. Do NOT
operate the UPS where the temperature exceeds 0-40 °C and the
humidity is over 0-90 % RH.
5.3
Connect to Utility and Charge
Plug in the AC input cord to the 2-pole, 3-wire grounded wall outlet.
For the best results, we suggest charging the battery at least 6 hours
with no load (no electrical devices such as computers, monitors, etc.)
connected before initial use. The unitcharges its battery while
connecting to the utility.
5.
INSTALLATION AND INITIAL SETUP
