12
For health and safety reasons, the unit must be earthed correctly!
Protect A may only be operated with or connected to a 220 / 230 /
240 VAC mains with protective grounding using a mains connection
cable with PE conductor (included in the delivery) that has been
tested in accordance with German standards (VDE).
Risk of burning!
Risk of burning!
Risk of burning!
Risk of burning!
The battery has powerful short-circuit currents. Incorrect connection
or isolation faults can lead to melting of the plug connections,
sparking potential and severe burns!
The unit has a warning signal that sounds when the battery voltage
of Protect A is exhausted or when the UPS is not working in its
normal mode.
Observe the following safety instructions to ensure permanent
operational safety of and safe work with the UPS:
•
Do not dismantle the UPS! (The UPS does not contain any parts that
require regular maintenance. Bear in mind that the warranty will be
invalidated if the unit is opened!)
•
Do not install the unit in direct sunshine or in close proximity of
heaters!
•
The unit is designed to be installed inside in heated rooms. Never
install the UPS in the vicinity of water or in an excessively damp
environment!
•
Condensation may occur if the UPS is brought from a cold
environment into the room where it is to be installed. The UPS must
be absolutely dry prior to startup. As a result, leave it to acclimatise
for at least two hours.
•
Never connect the mains input and the UPS output!
•
Ensure that no fluids or foreign bodies can penetrate the UPS!
