English
52
Repeating track on CD
Repeating CD
Stopping repeat
Selecting a section to be repeated
Using the DVD-menu
Using fast forward or reverse
1.
Select the track to be repeated.
2.
Press the
REPEAT
-button (Fig. 3/26). The message „REP: [OFF]“
appears on the screen.
3.
Press the
REPEAT
-button again to have the current track repeated.
You will see the message „REP: [1 REP]“ on the screen.
NOTE:
In the case of MP3 CDs it is also possible to repeat a directory. The
screen will then show the message „REP: [REP DIR].
Keep pressing the
REPEAT
-button (Fig. 3/26), until the message
„REP: [ALL]“ is displayed on screen.
Keep pressing the
REPEAT
-button (Fig. 3/26), until the message „REP:
[OFF]“ is displayed on screen.
You can defi ne a freely selected section to be automatically repeated.
To do this, proceed as follows:
1.
Mark the beginning of the section to be repeated. During repetition
press the button
A-B
(Fig. 3/27) on the remote control once. The
message „A - REPEAT“ appears on the screen.
2.
Mark the end of the section to be repeated by pressing the
A-
B
-button on the remote control once again. The message „A - B
REPEAT“ appears on the screen. The previously marked section is now
repeated.
Press the
A-B
-button again to stop the repetition.
NOTE:
The passage to be repeated must be located within one track (in the
case of CDs/MP3 CDs)
Normally each DVD has its own menu. Here you can choose chapters,
make settings, etc. This menu is specifi c for the DVD and can thus not be
explained in detail.
Press the
MENU
button (Fig. 3/5) to access the DVD-menu. Use the
Cur-
sor Buttons
(Fig. 3/31) to navigate in the Menu. Press the
ENTER
button
(Fig. 3/9) to confi rm.
If you are in a menu area for direct chapter selection, you can enter the
number of this chapter with the
Numerical Buttons
(Fig. 3/33) on the
remote control.
The DVD-Player has a fast forward and a fast reverse feature.
1.
Press the
FWD
(Fig. 3/15) or
REV
button (Fig. 3/16) to start
fast forward or fast reverse. The current replay direction and the
speed, e.g. „FORWARD x2
“ is now displayed on screen.
2.
Press the
FWD
or
REV
button several times in order to
change the speed. The speed can be accelerated by factor 2, 4, 8, 16
or 32.
05-MC 4613 DVD AEG_GB_new.indd 52
05-MC 4613 DVD AEG_GB_new.indd 52
12.09.2008 9:21:36 Uhr
12.09.2008 9:21:36 Uhr
