English
64
Troubleshooting
Before sending the machine to the Customer Services, use the following table to check whether you can rectify the
fault yourself.
Fault Possible
cause Solution
The power supply
light does not light
No power supply
WARNING:
Before troubleshooting, switch the player off .
Put the mains plug in correctly, if necessary, check the socket
is working with another appliance.
no power supply/ mains
switch switched off
Switch the player on by the mains switch (Fig. 1/13).
No image displayed
on screen
Video cable not correctly
connected
WARNING:
Before troubleshooting, switch the player off .
Check the correct fi t of the Video cable
„Connecting the Video
cable“
. Make sure that the jacks are tightly in the sockets.
no DVD/CD inserted
Insert a CD/DVD.
DVD/CD not compatible
Use only compatible media (see
„Technical data“)
.
DVD/CD incorrectly placed in
CD/DVD-tray
Turn the CD/DVD around.
CD/DVD is dirty
Clean the CD/DVD around
➯
„Handling CD/DVD“
.
CD/DVD is damaged
Use a diff erent CD/DVD.
Incorrect settings
Check the settings of your DVD-Player.
The child lock system is
activated
Deactivate the child lock.
The wrong TV mode has been
selected (no P-SCAN-capable
playback device).
Press the
VIDEO
button (Fig. 3/11) to change the TV mode.
No response when
pressing button
Power supply problem or
static charging of appliance
Switch off the main switch and pull out the mains plug.
Insert the mains plug into the socket and switch the player
on again.
No sound
Audio cable not connected
WARNING:
Before troubleshooting, switch the player off .
Video plug for transmission of the Video signal, you must use
and Audio cable in addition to the Video cable
➯
„Connecting
the Audio cable“
.
Amplifi er switched off
If you use an amplifi er for Audio output: check whether the
amplifi er is switched on.
Incorrect settings
Check the settings of your DVD-Player.
The remote control
does not work
wrong direction
The remote control is not pointed towards the DVD-Player.
too far away
Make sure that the remote control is not further than
5 m away from the player.
Batteries empty
Replace the batteries in the remote control
➯
„Remote control battery installation“
.
DVD cannot be
played
DVD has not been fi nalized
Use a fi nalized DVD.
The USB storage medium and/
or memory card are inserted.
Remove the memory card and the USB storage medium.
No radio reception.
The antenna cable is not
connected.
Insert the antenna cable fi rmly into the antenna socket of the
device.
Poor radio reception. The received radio station
is too weak for a stereo
operation.
Adjust the device to mono operation by pressing the
STEREO/MONO
button (fi g. 3/22).
In automatic search
mode the radio does
not stop at a trans-
mitting station.
The transmission signals are
too weak.
Tune in to a radio station manually.
05-MC 4613 DVD AEG_GB_new.indd 64
05-MC 4613 DVD AEG_GB_new.indd 64
12.09.2008 9:21:38 Uhr
12.09.2008 9:21:38 Uhr
