AEG LWR9516BN4, Руководство пользователя

Страница: 34 / 56

necessary to set the Drogen/Séchage
mode.
To run this programme:
1. After loading laundry and detergent,
press the Aan/Uit/Marche/Arrêt
button for some seconds to activate
the appliance.
2. Set the Non Stop 3h/3kg programme
by means of the programme dial.
The indicator appears on the display
3. Touch the Start/Pauze/Départ/Pause
button to start the programme.
Non-automatic wash&dry
programmes
In some washing programmes, you can
combine Wassen/Lavage and Drogen/
Séchage mode for running a complete
wash&dry programme.
Proceed as follows:
1. After loading laundry and detergent,
press the Aan/Uit/Marche/Arrêt
button for some seconds to activate
the appliance.
2. Load the laundry one item at a time.
3. Put the detergent and the additives in
the appropriate compartment.
4. Turn the programme dial to the
washing programme. The display
shows the default temperature and
spin. If necessary, change them
according to your laundry. The
display also shows the maximum
recommended load for washing
phase.
5. Set the desired options, if there are
available.
6. Touch the MODUS/MODE button
once to activate also the drying
function. The Wassen/Lavage and
Drogen/Séchage indicators come on.
The indicators and
appear on the display. The display
also shows the maximum
recommended load for a washing
and drying programme (e.g. 6 kg for
cottons).
7. Now, you can choose an automatic
drying level or a specific timed
drying.
At the beginning of the
drying cycle (3 - 5 minutes),
a slightly higher noise can
be heard. This is caused by
the compressor and it is
quite normal for compressor
powered appliances such as
refrigerators, freezers and so
on.
12.2 Washing and Drying -
Automatic levels
1. Tap on the Droogtegraad/Niveau
séchage button repeatedly until the
display shows the required dryness
level. The indicators in the display
illuminate accordingly:
a. Iron dry: for cotton
items;
b. Cupboard dry: for
cotton and synthetic items;
c. Extra dry: for cotton
items.
The time value on the display is the
duration of both cycles washing and
drying, calculated on a default load
size.
To have a good drying by
using less energy and in a
shorter time, the appliance
does not let you set a too
low spin speed for the items
to be washed and dried.
2. Touch button Start/Pauze/Départ/
Pause to start the programme. The
PROSENSE estimation starts.
In the display the door locked
indicator goes on, the indicator of the
running phase starts flashing.
The display also shows the remaining
programme time.
12.3 Washing and Timed
Drying
1. Tap on the button Droogtijd/Minuterie
repeatedly to set the desired time
value (see the "Timed drying" table
www.aeg.com 34