AEG LWR9516BN4, Руководство пользователя

Страница: 31 / 56

The ProSense estimation
starts at the end of the
countdown.
Cancelling the delay start
after the countdown has
started
To cancel the delay start:
1. Touch the Start/Pauze/Départ/Pause
button to pause the appliance. The
related indicator flashes.
2. Touch the Startuitstel/Départ Différé
button repeatedly until the display
shows .
3. Touch the Start/Pauze/Départ/Pause
button again to start the programme
immediately.
Changing the delay start after
the countdown has started
To change the delay start:
1. Touch the Start/Pauze/Départ/Pause
button to pause the appliance. The
related indicator flashes.
2. Touch the Startuitstel/Départ Différé
button repeatedly until the display
shows the desired delay time.
3. Touch the Start/Pauze/Départ/Pause
button again to start the new
countdown.
11.8 The ProSense System
load detection
The programme duration in
the display is referred to a
medium/high load.
After touching the Start/Pauze/Départ/
Pause button, the maximum declared
load indicator goes off, the indicator
flashes, the ProSense System starts the
laundry load detection:
1. The appliance detects the load in the
first 30 seconds, the indicator
flashes. the digit area shows
and the drum rotates shortly.
2. At the end of the load detection, the
indicator stop flashing. The
programme duration will be adjusted
accordingly and could increase or
decrease. After further 30 seconds,
the water filling starts.
At the end of the load detection, in case
of drum overload, the indicator
is
flashing in the display.
In this case, for 30 seconds, it is possible
to pause the appliance and remove the
exceeding garments.
Once removed the exceeding garments,
touch the Start/Pauze/Départ/Pause
button to start the programme again. The
ProSense System phase can be
repeated up to three times (see point 1).
Important! If the laundry amount will not
be reduced, the washing programme
starts anyway, despite the overload. In
this case, it will be not possible to
guarantee the best washing results.
About 20 minutes after the
programme start, the
programme duration could
be adjusted again depending
on the capacity of water
absorption of the fabrics.
The ProSense System
detection is carried out with
complete washing
programmes only (no
skipping phase selected).
The ProSense System is not
available with some
programmes, such as Wol/
Handwas/Laine/Lavage à la
main, programmes with
short cycles and without
washing phase.
11.9 Programme phase
indicators
When the programme starts the indicator
of the running phase flashes and the
other phase indicators are steady on.
E.g. the washing or pre wash phase is
running: .
When the phase ends the relevant
indicator stops flashing and is steady on.
The next phase indicator starts flashing.
ENGLISH 31