Setting up and connection instructions
41
Water Inflow
A pressure hose 1.35m in length is supplied.
If a longer inflow hose is required, only a VDE-approved, complete set
of hoses with fitted hose screw connections offered by our Customer
Service is permissible.
–
Sets of hoses in lengths of 2.2m, 3.5m and 5m are available for
washing machines without Aqua-Control.
–
Sets of hoses in lengths of 2.0m, 2.9m and 3.9m are available for
washing machines with Aqua-Control.
Attention!
Never cut into pieces in order to extend the hoses!
3
Sealing rings are supplied either in the plastic
nuts of the hose screw connection or in the en-
closed pack. Do not use other seals!
0
1.
Connect the hose with the angled connection to
the machine.
Attention!
–
Do not lay the supply hose
vertically downwards. Rather,
turn it to the right or left as
shown in the diagram.
–
Only tighten the screw
connection manually.
2.
Connect the hose with the
straight connection to a water tap with a screw
thread of R 3/4 (inches).
Attention!
Only tighten the screw connection
manually.
3.
By slowly opening the water tap before putting
the washing machine into operation, check
whether the connection is free of leaks.
Содержание LAVAMAT WSOFT 12
Страница 1: ...LAVAMAT WSOFT 12 Washing Machine User Information ...
Страница 47: ...47 ...
Страница 48: ...48 ...
Страница 49: ...49 ...