background image

Instructions for use

31

Softener has not been 
flushed into machine; 
drawer 

æ

 for care 

agent is filled with wa-
ter.

The softener insert has not 
been correctly positioned in-
side the care agent compart-
ment or is blocked.

Clean the washing powder 
drawer and position the sof-
tener insert firmly.

Washing is heavily 
creased.

Probably too much washing 
was packed into the drum.

Follow instructions for the 
maximum filling quantity 
(see Programme tables). 

Washing has not been 
spun properly. Residual 
water is still visible in 
the drum.

The drain hose is bent.

Remove the bend.

Maximum pump head (outlet 
head 1m from unit's floor 
surface) exceeded.

Contact customer service; a 
retrofit kit is available as a 
special accessory for pump 
heads over 1m.

Drain pump is blocked.

Switch off the unit and pull 
out the mains plug. Clean 
the drain pump.

Where a siphon is connected: 
siphon is blocked.

Clean the siphon.

Detergent deposits 
form in the washing 
powder drawer.

Water tap is not fully 
opened.

Open the water tap fully.

Filter in the screw connec-
tion of the inlet hose on the 
water valve or on the unit is 
blocked.

Close the water tap. Unscrew 
the inlet hose from the water 
tap and from the unit. Clean 
the filter.

The rinsing water is 
murky.

The cause is probably a de-
tergent with a high silicate 
content.

No negative influence on the 
rinse results; perhaps use 
liquid washing agent.

Door cannot be 
opened.

Door is locked for safety 
reasons. 

Wait for 1 or 2 minutes after 
the end of the programme.

Problem

Possible Cause

Remedy

Содержание LAVAMAT WSOFT 12





















































Отзывы: