AEG HK634070IB, Руководство пользователя

Страница: 11 / 16

– Stop the appliance and let it cool down
before you clean: limescale rings, water
rings, fat stains, shiny metallic discolorations. Use a special cleaner for glass ceramic
or stainless steel.
2. Clean the appliance with a damp cloth and some detergent.
3. At the end rub the appliance dry with a clean cloth.
What to do if...
Problem Possible cause and remedy
You cannot start the appliance
or operate it.
• You touched 2 or more sensor fields at the same time. Only
touch one sensor field.
• There is water or fat stains on the control panel. Clean the
control panel
• The key lock or child safety device operates . Stop the
function. See the section "Locking/unlocking the control pan -
el" and “Child safety device”.
• The STOP+GO function operates . Stop the function. See
the section "Starting the STOP+GO".
• Start the appliance again and set the heat setting in 10 sec -
onds.
The residual heat indicator does
not come on.
The cooking zone is not hot because it operated only for a short
time. If the cooking zone must be hot, speak to the after sales
service.
You cannot switch on the outer
rings.
Switch on the inner ring first.
The automatic heat up function
does not start.
• There is still residual heat on the cooking zone . Let the
cooking zone cool down
• The highest heat setting is set. The highest heat setting has
the same power as the automatic heat up function.
• You set the heat setting with sensor field. Start from
and use only.
A sound operates and appliance
starts and stops again. After 5
seconds one more sound oper -
ates.
You covered . Uncover the sensor field.
comes on.
• The automatic switch-off operates. Stop the appliance and
start it again.
Overheating protection for the cooking zone operates. Stop the
cooking zone and start it again.
and a number come on.
There is an error in the appliance.
Disconnect the appliance from the electrical supply for some
time. Disconnect the fuse from the electrical system of the house.
Connect again. If comes on again, speak to the after sales
service.
If you tried the above solutions and cannot repair the problem, speak to your dealer or the
Customer Care Department. Give the data from the rating plate, three-digit-letter code for
What to do if... 11