AEG HK634070IB, Руководство пользователя

Страница: 8 / 16

The automatic heat up function
The automatic heat up function starts when
you set a heat setting starting from . A
cooking zone operates with the maximum
power for some time and than automati -
cally switches back to the heat setting you
set.
If you set a higher heat setting during the
automatic heat up (for example from to
), the automatic heat up is adjusted.
If there is still residual heat on the cooking
zone (display ), the automatic warm up
does not start.
The time of the automatic warm up changes
for different heat settings:
1
2
3
4
5
6
7
8
9
10
11
0
1 2 3 4 5 6 7 8 9
Using the Timer
Use the timer to set how long the cooking zone operates for one cooking session.
Set the timer after the selection of the cooking zone.
You can set the heat setting before or after you set the timer.
•
Selection of the cooking zone:
touch again and again until the indicator of a
necessary cooking zone comes on.
•
Starting or changing the timer:
touch or of the timer to set the time (
00
-
99
minutes). When the indicator of the cooking zone flashes slower, the time counts
down.
•
Stopping the timer:
select the cooking zone with and touch to switch off the
timer. The remaining time counts backwards to
00
. The indicator of the cooking zone
goes out.
• Checking the remaining time: select the cooking zone with . The indicator of the
cooking zone flashes faster. Display shows the remaining time.
When the time elapses, the sound operates and
00
flashes. The cooking zone switches off.
• Stopping the sound:
touch
You can use the timer as a
minute minder
while cooking zones do not operate. Touch
. Touch
+
or
-
to select the time. When the time elapses, the sound operates and
00
flashes
Starting the STOP+GO
The function sets all cooking zones that operate to a keep warm setting.
• Touch to start
this function. The symbol comes on.
•
Touch to stop
this function. The heat setting that you set before comes on.
does not stop the timer function.
fully locks the control panel but not the sensor field .
8 Operating the appliance