ENGLISH
33
Progressive outputs (DVD)
Some TVs or monitors are equipped with component
video inputs that are capable of reproducing a progressi-
vely scanned video signal.
Using the Audio cable (not supplied), connect the
left/right AUDIO OUT jacks on your Unit to the left/right
AUDIO IN jacks on your TV and the Component video
cable (not supplied), connect the Green plug Y VIDEO
OUT jack on your Unit toY VIDEO IN jack on your TV, the
Blue plug PB/CB VIDEO OUT jack on your Unit to PB/CB
VIDEO IN jack on your TV and the Red plug PR/CR VI-
DEO OUT jack on your Unit to PR/CR VIDEO IN jack on
your TV to enjoy highest quality picture with less fl icker.
Connect the component video cable to TV, press SETUP
button and select Video Output to YUV (see page 43 for
setting of Video Output). To select the output signal for
better picture quality, press the P. SCAN button on the
remote control when DVD is stopped.
Notes:
• When progessive output is activated, no video signal
output from S-video and RCA (CVBS) video jacks.
• Make sure your TV supports progressive scan com-
ponent video signal, press the P. SCAN button twice
until “CVBS” display for going back CVBS video
signal.
Notes:
• Connect the Unit to your TV directly. If you connect
the Unit through a VCR, the playback picture will be
distorted because DVD discs are copy protected.
• When you connect the Unit to other equipment,
be sure the turn off the power and unplug all of the
equipment from the wall outlet before making any
connection.
• Refer to the instruction manual of the connected
equipment as well.
CONNECTING A VCR
Audio/Video cable
Using the supplied Audio/Video cable, connect the
yellow plug from VIDEO OUT jack on your Unit to VIDEO
IN jack on your TV, connect the left and right AUDIO OUT
jacks on your Unit to AUDIO IN jacks on your TV. If you
want the sound come from the speakers of the Main
Unit, you need not to connect these left and right Audio
cable from the Main Unit to your TV.
Video cable
Using the Video cable (not supplied), connect the VIDEO
IN (VCR) jack on your Unit to VIDEO OUT jack on your
VCR.
Audio cable
Using the Audio cable (not supplied), connect the
left/right AUDIO IN jacks on your Unit to the AUDIO
OUT jacks on your VCR. Switch the video recorder to
playback and the Home Cinema sets on AV IN.
• An adaptor can be bought locally to connect the
round RCA-style plugs to a socket. For the TV get a
scart INPUT adaptor. For the VCR get a scart OUT-
PUT adaptor.
To hear the sound from television programmes
through the Unit
Sound from the television does not go to the speakers of
the DVD amplifi er Unit with the suggested connections.
To hear sound from television programmes through the
DVD amplifi er’s loudspeakers you need to use your video
recorder as a television tuner. To do this follow these
steps:
1. Connect up the VCR as above in “Connecting a
VCR”. If your television does not have the round
(RCA-style) connectors you can get an RCA to scart
input adapter.
2. Press the FUNCTION button on the DVD Amplifi er
Unit to get AV IN mode, shown on the front panel
display.
3. On the television, select the AV or scart input channel
for the DVD amplifi er Unit.
4. On the VCR, select the television programme you
want to watch.
When using the VCR as a television tuner, you cannot
watch one programme while recording another.
Watching a DVD
1. Turn on the Unit, use the FUNCTION button on the
remote control or the front panel to select „DVD“.
2. Turn on your TV and follow the instructions included
with it to select VIDEO function which is correspond
to the VIDEO IN jack you need connected with the
Main Unit.
5....-05-DVD 4603 HC AEG_GB 33
16.04.2004, 9:22:34 Uhr
