AEG CIB6740ACB, Руководство пользователя

Страница: 11 / 40

5.2 Using the sensor fields
To activate a function touch and hold the
selected symbol on the display for
minimum 1 second.
5.3 Setting the time
You must set the time before you
operate the oven.
Only the top oven works
without the set time.
The flashes when you connect the
appliance to the electrical supply, when
there was a power cut or when the timer
is not set.
Press the or to set the correct
time.
After approximately five seconds, the
flashing stops and the display shows the
time of day you set.
5.4 Changing the time
You cannot change the time
of day if the Duration
or
End function operates.
Press again and again until the
indicator for the Time of Day function
flashes.
To set a new time, refer to "Setting the
time".
5.5 Preheating
Preheat the empty oven before first use.
Preheat the two ovens. Heat
up one oven at a time.
Set the functions listed
below, if applicable.
1. Set the function and the
maximum temperature.
2. Let the oven operate for 1 hour.
3. Set the function and set the
maximum temperature.
4. Let the oven operate for 15 minutes.
5. Set the function and set the
maximum temperature.
6. Let the oven operate for 15 minutes.
7. Turn off the oven and let it cool
down.
Accessories can become hotter than
usual. The oven can emit an odour and
smoke. Make sure that the airflow in the
room is sufficient.
6.
HOB - DAILY USE
WARNING!
Refer to Safety chapters.
6.1
Hob control panel
3 2 1
4
5
6
8 7
ENGLISH 11