6.3
OptiHeat Control (3 step
Residual heat indicator)
WARNING!
/ / There is a risk of
burns from residual heat.
The indicators show the level
of the residual heat for the
cooking zones you are
currently using. The
indicators may also come on
for the neighbouring
cooking zones even if you
are not using them.
The induction cooking zones produce
the heat necessary for the cooking
process directly in the bottom of the
cookware. The glass ceramic is heated by
the heat of the cookware.
6.4
The heat setting
To set or change the heat setting turn
the knob to the correct heat setting. To
deactivate turn the knob to off position
.
6.5
Automatic Switch Off
The function deactivates the hob
automatically if:
• all cooking zones are deactivated,
• you do not set the heat setting after
you activate the hob,
• you spill something or put something
on the control panel for more than 10
seconds (a pan, a cloth, etc.). An
acoustic signal sounds and the hob
deactivates. Remove the object or
clean the control panel.
• the hob gets too hot (e.g. when a
saucepan boils dry). Let the cooking
zone cool down before you use the
hob again.
• you use incorrect cookware. The
symbol comes on and the cooking
zone deactivates automatically after 2
minutes.
• you do not deactivate a cooking zone
or change the heat setting. After
some time comes on and the hob
deactivates.
The relation between the heat setting
and the time after which the hob
deactivates:
Heat setting
The hob deacti-
vates after
, 1 - 2
6 hours
3 - 4
5 hours
5
4 hours
6 - 9
1.5 hour
6.6
Automatic Heat Up
If you activate this function you can get a
necessary heat setting in a shorter time.
The function sets the highest heat setting
for some time and then decreases to the
correct heat setting.
To activate the function the
cooking zone must be cold.
To activate the function for a cooking
zone:
turn the knob for a cooking zone
to position
A
. comes on in the
display. Immediately set the correct heat
setting.
To deactivate the function:
turn the
knob to the off position.
6.7
PowerBoost
This function makes more power
available to the induction cooking zones.
The function can be activated for the
induction cooking zone only for a limited
period of time. After this time the
induction cooking zone automatically
sets back to the highest heat setting.
To activate the function for a cooking
zone:
touch
. comes on.
To deactivate the function:
change the
heat setting.
6.8
Timer
Count Down Timer
You can use this function to set how long
the cooking zone should operate for a
single cooking session.
ENGLISH
13
Содержание CIB6740ACB
Страница 1: ...USER MANUAL EN User Manual Cooker CIB6740ACB CIB6740ACM ...
Страница 38: ...www aeg com 38 ...
Страница 39: ...ENGLISH 39 ...
Страница 40: ...www aeg com shop 867337953 C 262019 ...