AEG BPK722910M, Руководство пользователя

Страница: 18 / 48

www.aegaustralia.com.au | www.aegnewzealand.co.nz 18
8. Remove the food sensor plug from the
socket and remove the dish from the
appliance.
WARNING! There is a risk of burns
as the food sensor becomes hot.
Be careful when you unplug it and
remove it from the food.
Food category: casserole
1. Activate the appliance.
2. Place half of the ingredients in a
baking dish.
3. Insert the tip of the food sensor exactly
in the centre of the casserole. The
food sensor should be stabilized in
one place during baking. Use a solid
ingredient to achieve that. Use the
rim of the baking dish to support the
silicone handle of the food sensor.
The tip of the food sensor should not
touch the bottom of a baking dish.
4. Cover the food sensor with the
remaining ingredients.
5. Put the plug of the food sensor into the
socket located in the front frame of the
appliance.
The display shows the food sensor
symbol.
6. Press or in less than 5 seconds to
set the food core temperature.
7. Set a heating function and, if
necessary, the oven temperature.
8. To change the food core temperature,
press . When the dish is at the
set temperature, an acoustic signal
sounds. The appliance deactivates
automatically.
9. Touch any symbol to stop the signal.
10. Remove the food sensor plug from the
socket and remove the dish from the
appliance.
WARNING! There is a risk of burns
as the food sensor becomes hot. Be
careful when you unplug it and remove
it from the food.
10.2 Attaching Telescopic
runners
If the telescopic runners (slides) are
not attached to the shelf supports
(racks), follow these instructions
1. Refer image below for feasible
positions.
2. Lay racks onto flat protected surface,
prior to fitting slides. Ensure the rack
and slides are of the same hand. E.g.
Left hand slide should be fitted on left
hand rack.
3. Push bottom clips onto selected wire.
4. Ensure both clips are secured to wire.
5. Repeat for the other side.