134
English
7. Clean the monitor with a dry, soft cloth or a soft cloth squeezed well after moistened with water,
diluted disinfectant alcohol, or diluted soapsuds.
8. No component in the monitor can be serviced by the user. The circuit diagrams, component part
lists, descriptions, calibration instructions, or other information which will assist the user’s appropriately
qualified technical personnel to repair those parts of equipment which are designated repairably can
be supplied.
9. The monitor can maintain the safety and performance characteristics for a minimum of 10,000 mea-
surements or three years, and the cuff can maintain the performance characteristics for a minimum of
1000 measurements.
10. It is recommended that the cuff should be disinfected 2 times every week if needed (for example, in
a hospital or in a clinic). Wipe the inner side (the side that contacts skin) of the cuff with a soft cloth
moistened with ethyl alcohol (75-90%) and squeezed, then dry the cuff by airing.
EXPLANATION OF SYMBOLS ON UNIT
Symbol for ”THE OPERATION GUIDE MUST BE READ”
Symbol for “WARNING”
Symbol for “TYPE BF APPLIED PARTS” (the cuff is a type BF applied part)
