127
English
Fig. 7
Fig. 7-1
Fig. 7-2
b. You can also press the “MEM” button in Clock Mode to display the stored results. The current
memory bank will flash and the amount of results in this bank will be displayed. See Fig. 7-1.
Press the “START” button to change to the other bank. See Fig. 7-2. Confirm your selection
by pressing the “MEM” button. The current bank will also be confirmed automatically after
5 seconds with no operation.
c. After selecting the memory bank, the LCD will display the average value of the last three results
in this bank. See Fig. 7-3 & 7-4. If no results are stored, the LCD will show dashes as shown in
Fig. 7-5.
Fig. 7-3
Fig. 7-4
Fig. 7-5
d. When the average is displayed and you press the “MEM” button, the most recent result will be
displayed. See Fig. 7-6. Then the blood pressure and the pulse rate will be shown individually.